Vertical RF Fractional MicroneedIing Machine

Strongest RF Fractional MicroneedIing Machine

Crystallite Depth 8 + Ice hammer, also known as gold RF Crystallite beauty instrument, crystallite depth 8  combines RF+ insulating microneedle + dot matrix technology;

The device is equipped with interchangeable 4 different probe configurations (12p, 24p, 40p, nano-probe).

And the system can be freely adjusted to set the insulating Crystallite head to penetrate into the skin at different depths of the target tissue (between 0.5-7mm), providing Minimally invasive treatment for deep 8mm subcutaneous adipose tissue remodeling, thermal effect that penetrates subcutaneous tissue up to 7mm + additional 1mm depth, aimed at remodeling collagen and coagulating adipose tissue.

The Crystallite Depth 8 is deeper than any RF micro needling device on the market today.

 

Working Principles

It is a minimally invasive fractional treatment combining microneedles and RF energy.Under the control of the electronic system, dozens of insulated needles quickly penetrate the epidermis at the same time, emit RF energy from the needle tip, and then quickly exit the skin.

RF energy is penetrated deep into the skin through tiny needles, causing tiny damage, penetrating and opening the absorption channel of the skin, so that nutritional products can enter the skin, and trigger the body’s natural healing response. 

Ice Hammer Handle Principle

Its principle is to reduce the surface temperature of the skin through cooling conduction to treat or relieve symptoms such as pain and swelling. This low temperature effect can not only improve skin problems, but also bring a cool and comfortable experience. In addition, ice hammer ice compress can also help shrink pores, soothe and calm.

Advantages 

1. Three handle design, wide range of treatment.
2. A variety of probe specifications: 12P, 24P, 40P, nano crystal head, one-time non reusable for more peace of mind.
3. Provide the deepest RF fractional therapy, which can penetrate subcutaneous tissue up to 8mm.
4. Realize humanized operation: the depth can be adjusted between 0.5 and 7mm, the depth of the needle can be adjusted freely, and it can be used on skin of any thickness.
5. Original burst mode: deep segmented subcutaneous heating technology, multi-level fixed-point superposition treatment at one time, uniform and stable energy delivery.
6. Insulated probe device “super sharp + ultra-high gold plating film + cone design”; The needle body is 0.22mm, and gradually becomes thinner to the top. The damage to the epidermis caused by 0.1mm of the needle tip is the least. So as to avoid burning skin pigmentation and basically no pain and bleeding. Improved safety and effectiveness.
7. Compared with the traditional ice hammer, the cooling effect of the traditional ice hammer is very poor, and it will stop freezing in two to three minutes. And our cooling speed is fast and the battery life is long-lasting.

Treatment Scope:

1. Wrinkle removal: fine lines, crow’s feet, forehead lines, nasolabial folds, neck lines, etc.;
2. Facial rejuvenation and beautification, skin regeneration, firming and lifting;
3. Remodel fat and collagen, improve cellulite, improve stretch marks, and refine skin texture
4. Postpartum repair: (abdomen) stretch marks, (buttocks, legs) swelling marks;
5. Skin rejuvenation: Improve uneven or rough skin texture, dull skin texture and make the skin rosy; shrink large pores;
6. Scar removal: acne pits and acne marks, acne depression scars, burn scars;
7. Treatment of acne: especially effective in the treatment of active acne;
8. Deodorization: treat underarm odor and armpit hyperhidrosis;
9. Regular skin maintenance.

Parameter
Touch Screen	10.4inches
Therapy Probe	12P, 24P, 40P, Nanocrystalline Head
Depth	0.5-7mm
Output Frequency	4Mhz
Operating Voltage	AC110V-230V±%, 50hz-60hz
Power	10-300W
Air box size	49+46+102cm
Gross Weight	30kg

FAQ YOU MAY CARE   

1. How long does a single treatment take?
   Treatment usually takes 15 to 20 minutes, depending on the size of the treatment area.
2. How often can I have a treatment?
   The recommended interval between each treatment is 4-6 weeks. It takes 28 days to make new collagen. The skin will continue to
   remodel for 3 months. However,treatment will be separated by nearly 1 month, and the results will be superimposed.
3. Will the treatment be painful? Do I need to apply anesthesia during treatment?
   Pain perception and tolerance vary from person to person, and they also depend on all parts of the body. Micro-needles usually
   require application of anesthesia, if the client can bear his pain, it is not necessary to apply anesthesia

 

Customer Feedback